Metal -cutting cooler
1. Excessive anti -pine properties - low foam formation, good performance both in soft and hard water (600PPM hardness).
2. Excellent protection against corrosion - all additives are biostabilized, which allows you to effectively control the growth of bacteria and extend the service life of the lubricant -chipping fluid.
3. Ecologically clean - effectively opposes bacterial decomposition and catalytic decay under the influence of settling metal chips. Reduces costs by reducing the volume of replenishment of concentrate. The spent liquid does not contain substances harmful to the environment, and its discharge after processing will not lead to a deterioration in the environmental situation.
Product Description:
The metal -cutting cooler is a translucent, biologically stable, water -soluble, microemulsic and semi -articular concentrate of metal -cutting liquids. Provides excellent penetration, cooling and lubrication for cutting and grinding of various materials.
Product features:
1. Low smell - the smell is very fragile, well -established in the systems for feeding autonomous and concentrated liquid, especially suitable for autonomous work.
2. It is used to non -ferrous metals, such as aluminum alloys, copper alloys and zinc alloys, as well as to ferrous metals, such as solid iron, carbon steel and stainless steel. An excellent room for lubricants - contains artificial polyester additives, which provide a huge amount of lubricants during processing and significantly enhance the effect of metal processing on the floor.
Excellent corrosion resistance - contains environmentally friendly steel and metal anti -corrosion agents with exceptional anti -corrosion safety for ferrous and non -ferrous metals. It protects cars and products.
| Test objects | Management parameter | Test objects | Management parameter |
| External condition | Transparent yellow liquid | Flash temperature (COC) | Inapplicable |
| Smells | Weak smell | Conductivity/ms | <3 |
| Density (h2o = 1) the refractive indicator | 0.90 ～ 1.0 1.2-1.4 | pH (undiluted initial solution) pH (5% dilution of 25 ° C) | Inapplicable 8.8-9.4 |
Mixing instructions:
* Recommended types of application: easy processing: 5 - 7%, average processing: 7 - 10%, processing: 10 - 15%.
* Typical labor use coefficient: 5% (1: 19) - 15% (1: 6).
* If the level of use exceeds the usual, please contact us to obtain technical support.
* Mix with water (focused response diluted with water).
* If possible, it is diluted with deionized water to extend the existence of the working fluid carrier, limit the amount of focused fluid used and maximize the performance of the working fluid.
* Now do not add any other elements to notes or diluents until Mirabelle technical services receive permission.
* The fraction of the concentration of the diluted response can be obtained using refractometer and refractive factor: the refractometer analyzes the X - the refractive coefficient = percentage of concentration.
Before checking the samples, calibrate the refractometer so that the use of deionized water is zero.
Choose a simple (uninhabited) response for processing the sample.
Instructions for use:
* Before using this product, relax your computer and bath / water tank, and then add an organized liquid for the treatment of magicbullet.
:: Do not encourage the processing of energy metals and various materials, such as magnesium and zirconium.
* Strict management (regular replenishment with new liquid) will help extend the service life of the entire bath.
* If the oil swims in the reservoir / pool of the processed liquid, it must be cleaned normally to suppress the growth of bacteria.
* Do not add / do not mix various products if they are not licensed. If necessary, apply for technical support to Magic Power.
