Soluble in water cutting oil
Product features:
1. Excessive anti -corrosion properties - does not contain phenols and nitrites, does not contain dietanolamine, has excellent anti -corrosion properties, especially suitable for grinding rolling rolls, guaranteeing that the surface does not rust for a long time after grinding.
2. Pre -free filter properties - uses the latest technologies and methods of chemical surface processing, which gives excellent resistance to oil pollution and the exceptional abilities of the precipitation of abrasive particles. This prevents the reverse flow of abrasive particles through the fluid supply system into the treatment zone, guaranteeing the accuracy of the grinded surface.
3. Longness and stability-thanks to excellent filtering properties and resistance to hard water, the Magic Power Z-17 remains transparent and clean even after prolonged use. A very long service life, in central fluid supply systems, it can be used up to 3 years without replacement, and the volume of fluid losses is minimal, which effectively reduces processing costs.
Products:
The cutting oil soluble in water is a modern chemically synthetic fluid that combines excellent flooring technology. The product has a first -class ability to precipitate iron chips and high -quality anti -corrosion properties with a very low foam formation rate. Special components fundamentally improve the accuracy of processing the grinding circle and the service life of the media.
Product features:
Excellent anti -corrosion properties - contain high -quality anti -corrosion and metal throttle additives, which provide excellent anti -corrosion protection for ferrous metals.
Excellent resistance to foaming as a whole - due to its powerful resistance to foam, the product can work in high -pressure gadgets, but does not include long -term antipenomaterials.
Environmental protection - reducing costs by reducing the dose of the introduced concentrate. The waste currently does not include components harmful to the environment, and can be removed after processing, excluding components harmful to the environment.
| Test objects | Management parameter | Test objects | Management parameter |
| External condition | Transparent yellow liquid | Flash temperature (COC) | Inapplicable |
Smells |
Weak smell | Conductivity/ms | <3 |
| Density (h2o = 1) the refractive indicator | 0.98 ～ 1.11 3.0 ± 0.2 |
pH (undiluted initial solution) pH (5% dilution of 25 ° C) | Inappropriate 9.7 ± 0.3 |
Preparation recommendations:
1. Recommended types of application: grinding for low floor and low roughness needs - 5 - 10%; For excessive polishing of the floor, roughness 10 - 15%.
2. Typical use: 5% (1: 19) up to 15% (1: 6).
If the use of the product goes beyond the norm, contact us for technical support.
4. Mixed use with water (the target response of water dilution).
For dilution, it is recommended to use desalinated water, which can help extend the lifestyle of the working fluid supplier, minimize the consumption of the central solution and maximize the properties of a treated solution.
The introduction of other resources in targeted or diluted solutions is not allowed without the permission of the Magic Power technology suppliers.
7. The regulation of concentration can be achieved using a refractometer and refractive coefficient to obtain a fraction of a concentration in a diluted solution: refractometric analysis X coefficient of refraction = percentage of concentration. Before checking the samples, the refractometer is calibrated to 0.0 using desalination water. When choosing samples of working fluid, you should choose smooth (non -polluting) samples if possible.
Guide to use:
1. The most suitable for low well -known media or industries that require excessive cleanliness.
2. When opening use, the product may have a weak smell that will disappear after one or two days.
3. Before using the product, combine the tools and the gas tank, and then add the organized magical working liquid of electricity.
4. Strictly control attention (regularly add sincere liquid); The traditional amount of addition is about 5%, and the inclusion of 7% can help extend the existence of a working fluid carrier in a container.
5. If in the tank for the working fluid there is a floating oil film, it must usually be eliminated to suppress the growth of bacteria.
6. It is no longer allowed to add/mix various goods, with the exception of permission. If necessary, please contact the Magic Power for technical support.
Other aspects:
Due to minor changes in the system or typical changes in production, the remaining products can also differ slightly from the goods listed in the table. This is normal, we may not write down this if we do not notify about it in advance!
Translation into Russian.
