Synthetic grinding coolant
Product characteristics:
1. Excessive lubricants - contains a new synthetic lubricant agent that provides excellent lubricant, which allows not only to effectively use it for grinding operations, but also for processing with moderate load, satisfying the lubrication requirements during cutting.
2. Filter filtering - uses the latest technology with chemical surface processing, which gives it excellent anti -stick properties and the exceptional ability to precipitate abrasive particles. This prevents abrasive particles entering the working area through the fluid supply system, providing the accuracy of the grinding surface.
3. Longness and stability-excellent filtration properties and resistance to hard water allow the Magic Power B-30 to remain transparent and clean even with prolonged use, with a minimum amount of waste, effectively reducing processing costs.
Product description:
A new methodological system is used synthetic grinding fluid, which is a universal fully artificial recovery and abrasive solution, which currently does not contain components such as phenolformaldehyde and nitrites. It consists of special factors that prevent oil pollution helps to separate foreign lubricants that enter the working fluid, maintain the long -term stability of the working fluid and significantly extend the life of its carrier. It is also used for etching.
Product characteristics:
An excellent foaming house - has powerful foaming properties, which makes it suitable for high -voltage structures, unless it takes a lot of time to add a foamist seller.
An excellent anti -corrosion house - all components are biologically stable to properly control the growth of bacteria and extend the existence of a recovery solution.
Environmentally and effectively counteracts the decomposition of microorganisms and precipitation of metal fragments, thereby preventing their catalytic decomposition. Processed liquids no longer include substances harmful to the environment, and their removal does not lead to a deterioration in the environment.
| Test objects | Management parameter | Test objects | Management parameter |
| External condition | Transparent yellow liquid | Flash temperature (COC) | Inapplicable |
| Smells | Weak smell | Conductivity/ms | 1.0 ~ 3.0 |
| Density (h2o = 1) the refractive indicator | 0.98 ～ 1.11 1.67 |
pH (undiluted initial solution) pH (5% dilution of 25 ° C) | Inapplicable9.32 ± 0.3 |
Preparation instructions:
1. Recommended amount of application: for low -blue, low -pounds of grinding: 3 - 5%; For high strength and excessive floor cleanliness, grinding: 5 - 10%.
2. Typical use: 3% (1: 32) up to 10% (1: 9).
If the dose exceeds the normal range, contact us for technical support.
4. Mixed use with water (response of the center of water dilution).
The use of desalinated water for dilution is encouraged, which will help increase the supply time of the working fluid, reduce the intake of the target fluid and ensure the maximum productivity of the treated fluid as a whole.
Do not add other material to focusing or dilution options until they are certified by the Magic Power B - 30 technical leadership team.
7. Regulation of concentration allows the use of refractometers and refractometers to determine the fraction of the concentration in the diluted solution: the refractometer analyzes the refractive coefficient X = percentage of concentration. Before testing the samples, the refractometer is calibrated using desecious water so that the analysis results are zero. As far as possible, smooth (non -triumphant) working fluids are used to select samples.
Storage instructions:
Avoid direct sunlight and overheating.
2. Avoid contact with the stove and heat source; Avoid moisture.
3. Avoid exposure to strong oxidizing agents, strong alkalis and acids.
After opening the packaging and discarding part of the focusing solution, tightly cover the lid to prevent the disease of the last product in the package.
5. Control in a well -ventilated, cool room.
If the product is stored for a long time, the color becomes dark, but now it does not affect the effectiveness of the product.
If the product freezes at low temperatures, place it at a temperature of 20 ° C in the room and completely defrost before use, which will not affect the quality of the product.
Package:
200 liters / large metal barrel
