Band Saw Cutting Oil
Product Features:
1.Durability & Performance Stability - Excellent filtration and hard water resistance, making Magic Power Z-16 stay clean and clear after long-term use; Very long service life, in a centralized fluid supply system, can be guaranteed for at least 3 years without replacement, with very low carryover, effectively reducing processing costs.
2. Excellent anti-corrosion performance - contains high-efficiency rust inhibitor and metal corrosion inhibitor, has excellent anti-corrosion effect on ferrous metals.
3. Excellent anti-foaming performance - special strong anti-foaming ability, so that it can adapt to the high pressure of the system for a long time without adding an antifoamer.
4.Eco-friendly - Reduces costs by reducing the amount of concentrate added. The waste liquid does not contain substances harmful to the environment and does not lead to deterioration of the environmental situation after cleaning and discharge.
Product Description
Band saw cutting oil is a metalworking fluid designed specifically for sawing (e.g., band saws, circular saws, bow saws, etc.) whose main functions are cooling, lubrication, chip removal, and rust prevention. Compared to conventional cutting fluids, sawing fluids are more focused on efficient cutting, extending the life of the saw blades and reducing material loss.
Advantages and features:
1. Efficient cooling to prevent overheating
Friction during sawing creates a high temperature, and the saw liquid quickly cools the saw blade and the workpiece,
Avoiding:
Annealing and softening of the saw blade (reducing hardness and shortening service life).
The workpiece is thermally deformed (which affects the cutting accuracy, especially of thin-walled parts).
2. Excellent lubricity and reduced friction
Contains EP additives (such as sulfur, chlorine and phosphorus) that form a high-pressure lubricating film to reduce saw blade wear.
Reduces sawing resistance, increases feed speed, and improves cutting efficiency.
| Test Subjects | Control Parameter | Test Subjects | Control Parameter |
| External condition | Clear yellow liquid | Flash Point (COC) | N.a. |
| Smells | faint odor | Conductivity/ms | <3 |
| Density (H2O=1) Refractive index | 0.98～1.11 3.0±0.2 |
pH (undiluted stock solution) pH (5% dilution 25°C) | Not applicable 9.7±0.3 |
Mixing recommendations:
*Recommended quantity: 5 to 10% for low grinding requirements and high floor end requirements.
*Recommended levels of use: 5 to 10% for low grinding requirements and high floor end requirements; 10 to 15% for high grinding requirements and high floor end requirements.
*Typical working usage: 5% (1:19) to 15% (1:6).
*Contact us for technical assistance if normal usage milestones are exceeded.
*Mix with water (dilute the solution with water).
*Dilute with deionized water at every opportunity to extend fluid life, reduce the amount of solution used, and maximize fluid performance.
*Do not add any other materials to the solution or dilution other than those licensed through the Magic Power Technical Service.
*Concentration can be monitored with a refractometer and refractive index to get a percentage representation of the dilute solution: refractometer measurement x refractive index = percent concentration.
Calibrate the refractometer with deionized water to zero analysis before sampling the sample.
Calibrate the refractometer with deionized water to zero analysis before sampling the sample.
Select a cleaner (uncontaminated) liquid for the sampling method.
Attention:
Avoid contact with eyes and ingestion of Magic Power Z-16 Concentrate. In case of contact, rinse eyes immediately with clean, cold water or seek medical attention.
Other aspects:
Due to minor formula adjustments or normal changes in production, the final product data may differ slightly from those shown in the table. This is normal and will not be communicated without notice!
